Quck answer
To clean a My Little Steamer, follow these steps:
1. Fill the water tank with distilled water, avoiding overfilling.
2. Plug in the steamer and allow it to heat up for a few minutes.
3. Hang the item you want to steam on a hanger or place it on a clean, flat surface.
4. Hold the steamer upright and slowly move it across the fabric, starting from the top and working your way down.
5. For stubborn wrinkles, hold the steamer closer to the fabric and apply gentle pressure.
6. After steaming, unplug the steamer and allow it to cool down.
7. Empty any remaining water from the tank and wipe the exterior with a damp cloth.
8. Store the steamer in a cool, dry place for future use.
Remember to always read the manufacturer’s instructions for specific cleaning tips and precautions.
Eliminating wrinkles from your kitchen curtain can be quite a task unless you keep the curtain on the rod and utilize a steamer. My Little Steamer is a portable device designed to remove wrinkles from clothing and fabric without the need for an iron and an ironing board. The device uses regular tap water to generate steam, but over time, mineral deposits from hard water can accumulate inside the device. When this occurs, it is necessary to clean the My Little Steamer.
Step 1
Disconnect the steamer and allow it to cool down.
Step 2
Rotate and detach the reservoir cap, and empty any water present in the tank.
Step 3
Fill the tank halfway with white vinegar. The tank has a designated full line; fill it halfway to that line. Fill the remaining portion of the tank with tap water and reattach the reservoir cap.
Step 4
Plug the steamer into an electrical outlet and let it heat up for one minute without reaching boiling point.
Step 5
Unplug the steamer and let it cool down for approximately five minutes.
Step 6
Rotate and remove the reservoir cap. Empty the water and rinse the interior of the tank multiple times using fresh water.
Step 7
Repeat the process as necessary.
