Quck answer
To open a Gojo Soap Dispenser, follow these steps:
1. Locate the lock on the top of the dispenser.
2. Insert a key or coin into the lock and turn it counterclockwise.
3. Remove the top cover of the dispenser by lifting it up.
4. Once the cover is off, you can access the refillable soap reservoir inside.
5. Fill the reservoir with your desired liquid soap.
6. Replace the top cover by aligning it with the dispenser and pressing it down firmly until it clicks into place.
7. Your Gojo Soap Dispenser is now ready for use.
Gojo soap dispensers utilize a specific type of cartridge refill to simplify the process of replacing an empty soap dispenser compared to other types of dispensers. To unlock the Gojo soap dispenser, follow these steps:
Step 1
Apply pressure to the top of the Gojo soap dispenser by squeezing the sides inward. There is a latch at the top of the dispenser that secures the cover, which may be difficult to open initially when refilling the soap dispenser.
Step 2
Listen for a clicking sound, indicating that the cover has detached from the latch. Gently pull the cover forward and lower it. The cover should hang from the bottom of the soap dispenser. It is not necessary to remove the cover completely; it can remain attached at the bottom.
Step 3
Remove the empty liquid soap packet and replace it with a new one. Make sure the packet is properly positioned inside the Gojo soap dispenser.
Step 4
Raise the cover back into position and firmly press it against the top of the soap dispenser. The latch should click back into place, securing the cover. Verify that the latch has caught properly by gently tugging on the front of the cover to ensure it is not loose. If the cover is loose and falls open again, apply more pressure until you hear a click.
