Quck answer
To clean melted plastic from cast iron, follow these steps:
1. Allow the cast iron to cool completely before attempting to remove the melted plastic.
2. Use a plastic scraper or credit card to gently scrape off as much of the melted plastic as possible. Be careful not to scratch the surface of the cast iron.
3. Fill a sink or basin with warm water and add a few drops of dish soap.
4. Place the cast iron in the soapy water and let it soak for at least 30 minutes.
5. After soaking, use a scrub brush or sponge to scrub away any remaining melted plastic.
6. Rinse the cast iron thoroughly with warm water.
7. Dry the cast iron completely to prevent rust.
By following these steps, you can effectively clean melted plastic from cast iron without damaging the surface.
When plastic comes in contact with a hot cast-iron object, it melts and becomes stuck to the pan. Removing melted plastic can be a challenging task. Here are the steps to clean melted plastic from a cast-iron pan:
Step 1
Place the cast-iron pan in the freezer and let it chill for 2 or 3 hours.
Step 2
Take out the pan from the freezer and put it on a secure, flat surface.
Step 3
Use a spatula or another blunt object to chip away at the frozen plastic.
Step 4
Take a cloth and soak it with a small amount of nail polish remover.
Step 5
Wipe the melted plastic with the cloth that has nail polish remover. Keep rubbing until the plastic is completely removed.
Step 6
Wash the surface with warm water and dish soap to remove any remaining residue.
Step 7
Spray a silicone spray like WD-40 3-in-One on the surface of the melted plastic and the surrounding area.
Step 8
Use a razor blade to peel off the silicone spray and the remaining plastic.
Step 9
Continue scraping off the plastic until all of it is removed. For stubborn areas, you may need to apply more silicone spray.
Step 10
Once all the plastic is removed, wipe off any excess silicone spray from the surface.
