Quck answer
Cleaning a Vent-A-Hood is a simple process that can be done in a few steps:
1. Turn off the power: Before cleaning the Vent-A-Hood, make sure to turn off the power to avoid any accidents.
2. Remove the filters: Most Vent-A-Hoods have removable filters. Take them out and soak them in warm soapy water to remove grease and grime.
3. Clean the exterior: Wipe down the exterior of the Vent-A-Hood using a damp cloth and a mild cleaner. Pay special attention to any stubborn stains or grease buildup.
4. Clean the interior: Use a vacuum cleaner or a brush attachment to remove any debris or dust from the interior of the Vent-A-Hood.
5. Reassemble and test: Once the filters are dry, reassemble the Vent-A-Hood and turn on the power to make sure everything is working properly.
Regular cleaning of your Vent-A-Hood will help maintain its performance and extend its lifespan.
A stovetop hood range serves more than just a decorative purpose in a busy kitchen. It also eliminates grease particles, cooking odors, and smoke from the stove top through the ventilation system. However, over time, the hood parts can accumulate gunk, hindering its efficiency. Even if the range hood is turned on and emitting loud noise, it may not be working effectively if it is clogged with years of grease and grime.
Advantages of Regular Cleaning
Thoroughly cleaning the parts by hand can improve the efficiency of the range hood and reduce electricity usage. It can also extend the lifespan of the blower. Molly Maids recommends cleaning the range hood exterior and exhaust fan filters at least twice a year.
Cleaning the Vent-A-Hood
If you frequently cook with oil or high-fat foods at high temperatures, you may need to clean the range hood more often to prevent grease buildup in the moving parts of the blower housing. Prior to cleaning, always ensure that the hood is unplugged to minimize the risk of electric shock or injury.
A homemade degreaser solution can be made by combining 1 tablespoon of dishwashing liquid with 1 gallon of warm water. For stubborn grease and dirt, create a paste using equal parts of baking soda and dishwashing liquid, then slowly add vinegar. Apply this paste to hard-to-clean areas and let it sit for 10 to 30 minutes.
Commercial degreasers can effectively remove grime. Spray the degreaser onto the range parts and scrub with a brush to reach grooves and corners. Rinse thoroughly before reassembling the range hood.
Maintaining Vent-A-Hood Magic Lung
The Vent-A-Hood range hoods have a built-in blower system, known as the Magic Lung, to keep the ventilation clean during regular use. However, the Magic Lung blower also requires cleaning.
The E-Z Clean blower shields, located at the front of the hood, should be cleaned regularly to assist the Magic Lung in its function. Unsnap the suitcase latches on either side of the housing and gently pull and tilt the blower shields forward and away from the housing.
All Magic Lung parts can be cleaned in a bucket of warm, soapy water. Allow the Magic Lung to soak before scrubbing and rinsing. According to Vent-A-Hood, the blower housing and E-Z Clean blower shields can also be run through a dishwasher cycle, especially if they are sticky with grease and grime.
Repairing the Vent Hood
If the range hood is making unusual noises or not effectively removing smoke and steam from the stove top area, it may be necessary to call a professional for vent hood repair. Repairing the vent hood may involve electrical and duct work to ensure proper functioning. Vent-A-Hood accessories can be used to create the appropriate ducting for the range hood.
