Quck answer
To clean a Conair steamer, follow these simple steps:
1. Empty the water reservoir and unplug the steamer.
2. Mix equal parts of white vinegar and water in a bowl.
3. Dip a clean cloth or sponge into the vinegar solution and wipe the exterior of the steamer, removing any dirt or residue.
4. Use a cotton swab dipped in the vinegar solution to clean the steam nozzle and other small crevices.
5. Rinse the cloth or sponge with clean water and wipe the steamer again to remove any vinegar residue.
6. Allow the steamer to air dry completely before using it again.
Remember to always consult the manufacturer’s instructions for specific cleaning recommendations for your Conair steamer.
While some individuals find ironing their clothes to be a calming and enjoyable activity, others prefer to avoid it altogether. For those in the latter group, a Conair steamer is a convenient solution. By filling the steamer with water, you can easily eliminate wrinkles from your clothes. The steamer heats the water, creating steam that effortlessly removes wrinkles and folds without the need for an ironing board. However, the water used in the steam cleaner can leave mineral deposits behind, requiring periodic cleaning to ensure the steamer continues to function properly. The frequency of cleaning depends on how frequently the steamer is used and the hardness of the water. If the machine produces less steam or emits it unevenly, it is time for a cleaning.
The Cleaning Procedure
Cleaning your steamer is a simple process. Fill the water tank two-thirds full with distilled water, and then fill it completely with white vinegar. Turn on the steamer and let it warm up. Once ready, use the steamer until the water reservoir is only half full. It is important not to steam your clothes during the cleaning process, as the vinegar may damage them or leave an unpleasant odor. However, you can make the most of the steam by using it to clean other surfaces that are not affected by vinegar, such as kitchen countertops, bathtub and sink edges, and outdoor patios.
Once the tank is half full, turn off the steamer, unplug it, and allow the remaining water and vinegar mixture to cool for at least 30 minutes. After cooling, unscrew the drain plug at the bottom of the steamer and empty the unit. Replace the drain cap and repeat the entire cleaning process. Run the steamer through two or three cleaning cycles before rinsing it and considering the job done.
Rinsing the Steamer
To rinse the steamer after cleaning and remove any remaining scale or vinegar, fill the water tank completely with distilled water. Turn on the steamer, let it warm up, and run the unit until the tank is nearly empty. Unplug the steamer and allow it to cool. Empty any remaining water before storing the unit until its next use.
Steaming Tips
Once your steamer is clean, shiny, and functioning optimally, there are a few tips and tricks you can follow to maintain its performance. It is best to only add water to the steamer, with the exception of vinegar during the cleaning cycle. Bleach and other laundry additives can harm the steamer and your clothing. Additionally, store the steamer empty to prevent unwanted foaming caused by stagnant water. Empty the steamer before storing it and always start each steaming session with fresh, clean water.
