Quck answer
To remove wax from a sink, follow these steps:
1. Scrape off excess wax using a plastic scraper or credit card.
2. Use a hairdryer to soften the remaining wax and blot it with a paper towel.
3. Apply a small amount of dish soap mixed with warm water to the wax stain.
4. Gently scrub the area with a soft cloth or sponge.
5. Rinse the sink with clean water and dry it with a towel.
6. For stubborn wax stains, use a non-abrasive cleaner or vinegar solution.
7. Repeat the process if necessary.
Remember to always test any cleaning solution on a small, inconspicuous area of the sink before applying it to the wax stain.
If wax spills or drips in a sink, it’s important to remove it quickly to prevent it from clogging the pipes. Whether it’s candle wax or hair removal wax, the key is to remove as much as possible while it’s still somewhat soft. Reheating and blotting it up will eliminate the remaining wax.
Using Sink Paper for Liquid Wax
If the wax spill is fresh and hasn’t hardened yet, immediately grab sink paper or paper towels and blot the area. Avoid rubbing the wet wax, as this may spread it thinly and make it harder to remove. For a large spill, continue blotting with fresh paper towels to remove as much of the mess as possible. Once you’ve blotted most of it and it’s starting to cool, use your fingers to pick off more wax before it completely hardens.
Dispose of the paper towels and wax bits. Do not try to melt the wax with hot water to make it go down the drain, as this could lead to clogs in the future.
For soft waxes, such as car wax on porcelain sinks, simply wipe away the excess with a paper towel by wiping from the outer edges of the wax spill towards the center. Once you’ve wiped away as much as possible, use the remaining wax to buff that part of the sink. Car wax actually helps prevent buildup of films and residues on surfaces like stainless steel and porcelain.
Safely Scrape the Wax
To safely remove hardened wax from any sink, use tools that won’t scratch or damage the sink basin. Start by scraping away hardened pools of wax with the back of a plastic spoon or a plastic scraper. Vacuum up the loose bits of wax or pick them up by hand and dispose of them in the trash. Remove as much wax as you can. Heat or ice can help remove the rest.
The Method of Heating the Wax
One of the most effective ways to remove stubborn bits of wax is to reheat it and then blot it before it hardens again. Fold a few absorbent paper towels, or keep an old cotton towel nearby to clean up the wax. Hold a hair dryer, turned on to high, a few inches above the wax mess. Keep heating the wax until it becomes shiny and liquid. Immediately turn off the hair dryer and blot the wax with the paper or cotton towel. Avoid rubbing the wax.
As the towel collects wax, rotate it so that a clean area can absorb more wax. If the remaining wax hardens, reheat it with the hairdryer and continue the blotting process with a fresh paper towel. Repeat this until you’ve removed as much wax as possible.
The Process of Chilling the Wax
In many cases, chilling the wax can make it brittle enough to snap it off the sink. Place a few ice cubes in a ziplock sandwich bag, seal the bag, and place it on top of the wax for several minutes. Set the bag aside and use your fingernail, a plastic scraper, or the edge of a plastic spoon to pick at the ice. Remove and discard the loosened bits of wax.
Sink Cleaning
When dealing with sinks made of materials like glass or stainless steel, wax can leave a dull film. To get rid of this cloudy residue, clean the area with warm, soapy water or a cleaner made specifically for that type of sink. If any residue remains, gently rub the area with a small amount of baby oil or mineral oil on a paper towel. Use a fresh paper towel to wipe away the oil. Finally, wash the area again with soapy water.
