Quck answer
Cleaning the Vornado humidifier is a simple process that can be done regularly to ensure its efficiency and longevity. Here are the steps to clean the Vornado humidifier:
1. Turn off and unplug the humidifier.
2. Remove the water tank and empty any remaining water.
3. Mix a solution of water and vinegar (1:1 ratio) in a container.
4. Use a soft brush or cloth to clean the inside of the water tank and base with the vinegar solution.
5. Rinse the tank and base thoroughly with clean water.
6. Use a brush to clean the wick filter, removing any debris or mineral deposits.
7. Allow all parts to air dry before reassembling the humidifier.
8. Regularly clean the Vornado humidifier every 1-2 weeks for optimal performance.
In the winter season, when the air is cold and dry, it can lead to static electricity, respiratory issues, and dry skin. The Vornado humidifier is designed to circulate humid air in a room of up to 700 square feet by using adjustable fan and humidity settings. However, with regular use, the humidifier and its filter can accumulate residue from hard water or pollutants. Therefore, it is important to clean and disinfect the Vornado humidifier on a weekly basis. Proper maintenance ensures that the humidifier operates safely and effectively.
Removing Scale
Step 1
First, turn off and unplug the humidifier.
Step 2
Next, lift the power head, filters, and water reservoir from the base of the humidifier.
Step 3
Make sure to empty any water from the base and water reservoir. After that, rinse them thoroughly with clean water and empty them again.
Step 4
Now, fill the reservoir with a mixture of 1 cup of white vinegar and 1 gallon of water. Let it sit for 20 minutes.
Step 5
Empty the reservoir and use a soft brush to scrub the interior of the reservoir, removing any buildup. Rinse the reservoir thoroughly with warm water.
Step 6
Refill the reservoir with a mixture of 1 teaspoon of chlorine bleach and 1 gallon of water. Allow it to sit for 20 minutes, ensuring that the bleach solution comes into contact with all surfaces inside the reservoir.
Step 7
Empty the bleach solution and rinse the reservoir thoroughly with warm water until there is no remaining bleach smell.
Step 8
Use a clean towel or paper towels to dry the reservoir.
Step 9
Prepare a container with 1 gallon of warm water and 1 teaspoon of chlorine bleach. Place the filters in the container and swish them around to remove any residue and disinfect them.
Step 10
Rinse the filters thoroughly with clean running water, making sure to shake off any excess water.
Step 11
Finally, place the filters, water reservoir, and power head back into their respective positions on the base.
