Quck answer
Cleaning a shower basin is a simple process that can be done with a few basic steps. Here is a quick and concise guide on how to clean a shower basin:
1. Gather your cleaning supplies: You will need a mild cleaner or a mixture of vinegar and water, a scrub brush or sponge, and a cloth or towel.
2. Remove any items from the shower basin: Take out any shampoo bottles, soap bars, or other items that may be in the way.
3. Spray the cleaning solution: Apply the cleaner or vinegar and water mixture to the shower basin, focusing on areas with soap scum or stains.
4. Scrub the basin: Use a scrub brush or sponge to scrub the entire surface of the shower basin, paying special attention to any stubborn spots.
5. Rinse thoroughly: Use clean water to rinse away the cleaning solution and any residue.
6. Dry the shower basin: Use a cloth or towel to dry the shower basin and prevent water spots.
By following these steps, you can easily keep your shower basin clean and fresh.
After you take a shower and feel refreshed, the soap scum, hair, and grime you leave behind can make your shower basin dirty. If you have hard water, there may also be mineral deposits that cause stains and films that are difficult to remove. By using a combination of gentle and strong cleaners, you can find the right methods to clean and refresh your shower basin.
Things You’ll Need
-
Powdered dish soap
-
Water
-
Sponge
-
White vinegar
-
Bowl
-
Eraser sponge
-
Baking soda
-
Lemon juice
-
Salt
-
Non-chlorine bleach
How to Clean a Shower Basin
Step 1: Remove Items From the Shower
Before you start cleaning, take out your shampoo, accessories, and other items from the shower. If it’s a nice day, open the window to let fresh air into the bathroom. Keep the door open and turn on the exhaust fan for ventilation.
Step 2: Clean Above the Basin First
If you are doing a full-shower cleaning, start by cleaning the shower door and shower walls. This way, you can save time and effort by working from the top to the bottom of the shower. If you clean the basin first and then the walls, the dirt from the walls may wash down into the basin and require you to clean it again.
Step 3: Turn on Hot Water
To make cleaning easier, clean your shower after taking a steamy hot shower or turn on the hot water for a few minutes to create steam in the bathroom. The steam helps loosen the dirt on the shower basin.
Step 4: Start With Simple, Gentle Cleaners
Begin by using the mildest and least abrasive cleaning method available. Dish soap is a gentle cleaner that effectively removes soap scum. Sprinkle powdered dish soap onto a sponge and moisten it with water, or mix liquid dish soap with warm water to create a soapy cleaning solution. Use a sponge or a soft-bristled brush to scrub the basin and remove grime. Let the cleaner sit on the surface for 10 minutes or longer to loosen stubborn dirt before scrubbing. Rinse the shower basin thoroughly and proceed with additional cleaning methods if needed.
Step 5: Clean Hard Water Stains
To remove hard water deposits and access deeply embedded dirt in the shower floor, create a mixture of 1/2 cup of vinegar and 2 cups of water. Dip a sponge into the vinegar solution and rub it onto areas with hazy yellow stains. Most of the hard water deposits are usually found near the drain. Rinse the shower basin and allow it to dry.
Step 6: Tackle Other Stains
If there are stains in the tub, use an eraser sponge. Try using it dry first, and if needed, dampen the sponge slightly with water. Use the eraser sponge to remove dye marks, dirt, and rust spots. It is a gentle yet effective cleaning tool that can eliminate various types of stains.
Step 7: Remove Stains With Baking Soda
To get rid of stains in your shower, sprinkle baking soda all over the floor. Then, squeeze some lemon juice onto the dry soda to create a paste. Use a sponge or cleaning brush to scrub the paste into the floor, and let it sit for at least 10 minutes. After that, rinse off the cleaner and you’ll notice a brighter and cleaner floor. Alternatively, you can use salt instead of baking soda for this treatment.
Step 8: Use Non-Chlorine Bleach for Deep Cleaning
If you need a stronger cleaner for your shower, pour non-chlorine bleach onto the floor. However, be cautious and do not mix bleach with other cleaners, especially vinegar and ammonia, as it can create a toxic gas. Even if you have rinsed off the vinegar, adding bleach shortly after can still cause a reaction. Add a little water to the bleach and swirl it around. Then, use a sponge to cleanse the shower floor. Let the non-chlorine bleach cleaner work its magic for 30 minutes, and then rinse the shower thoroughly.
