Guide on Removing Melted Plastic From Wood

Quck answer

Removing melted plastic from wood can be a tricky task, but with the right approach, it can be done effectively. Here are some steps to follow:

1. Allow the plastic to cool and harden completely before attempting to remove it. This will prevent further damage to the wood.

2. Use a plastic scraper or a credit card to gently scrape off as much of the melted plastic as possible. Be careful not to scratch the wood surface.

3. Apply heat to the remaining plastic using a hairdryer or a heat gun set on low heat. This will soften the plastic, making it easier to remove.

4. Once the plastic is softened, use a clean cloth or paper towel to wipe off the melted plastic. Repeat the heating and wiping process until all the plastic is removed.

5. Finally, clean the area with a mild soap and water solution to remove any residue.

Remember to test any cleaning products or methods on a small, inconspicuous area of the wood before applying them to the melted plastic stain.


Once melted plastic has cooled down, it becomes hard and sticks to almost any surface. The level of attachment will be stronger if the surface is more porous. Therefore, removing plastic that has melted onto wood can be difficult if the wood furniture is knotty or unfinished. However, if the wood is smooth and finished, it may be easier to scrape off the plastic. It is important to avoid using metal objects to scrape finished wood, as this could cause scratches or damage to the wood.

Step 1

Insert the edge of a plastic credit card between the melted plastic and the wood.

Step 2

Apply pressure to the credit card to try and remove the melted plastic. Sometimes, the plastic will come off easily, while in other cases, it may not budge.

Step 3

Cover the melted plastic with petroleum jelly.

Step 4

Turn on a hairdryer and set it to high heat.

Step 5

Direct the hot air towards the melted plastic. This will heat up the petroleum jelly, which in turn will help to heat the plastic and soften it.

Step 6

Once the plastic has softened enough, use the edge of a credit card to scrape it off.

Leave a Comment