How to Unlock a Four Digit Combination Lock

Quck answer

To open a four number combination lock, follow these steps:

1. Turn the dial clockwise three full rotations to clear any previous attempts.

2. Start rotating the dial clockwise until the first number of the combination aligns with the reference point.

3. Rotate the dial counterclockwise, passing the second number once, and stop when it aligns with the reference point again.

4. Rotate the dial clockwise directly to the third number of the combination.

5. Finally, turn the dial counterclockwise until it stops moving completely.

If the lock opens, you have successfully entered the correct combination. If not, double-check the numbers and repeat the process.


Although not as popular as three-digit combination locks, four-digit combination locks can be used for luggage, lockers, safes, and more. Understanding how to unlock a four-digit combination lock may seem confusing at first, but it is actually quite simple to learn. This article will guide you through the step-by-step process of unlocking a four-digit combination lock. Once you master this type of lock, you can secure anything you want to keep safe.

Step 1

Find your combination. Your combination should be written on a slip of paper that came with your lock. Before you start using your four-digit combination lock, make sure to memorize the combination.

Step 2

Locate the first number. Rotate the top wheel to the right until you find the first number of your combination. Ensure that the number is centered on the top of the wheel.

Step 3

Set the second dial to the second number in the combination. Align the number in the center of the wheel, just like you did with the first number.

Step 4

Use the third wheel to find the third number in the combination. Turn the third wheel to the right until you reach the desired number, and center it before moving on to the fourth number.

Step 5

Locate the fourth number on the bottom wheel of the lock and center it.

Step 6

Once all four numbers are aligned, hold the base and pull up on the metal half-circle bar at the top of the lock. The lock should open. If it doesn’t, double-check that all the numbers in the combination are correctly aligned and set to the right numbers. Then try pulling up on the bar again to unlock the lock.

Leave a Comment