Quck answer
When using a multimeter with 220 or 110 volts, follow these steps:
1. Set the multimeter to the appropriate voltage range, either 220V or 110V.
2. Ensure the multimeter probes are in the correct ports for voltage measurement.
3. Connect one probe to the live wire and the other probe to the neutral wire or ground.
4. Read the voltage measurement on the multimeter display.
5. Remember to turn off the power and disconnect the probes after use.
When you try to turn on an electrical device in your home and nothing happens, it could mean that you need to check the voltage and current of the outlet. A multimeter is a versatile tool for troubleshooting electrical issues, as it can measure voltage at different ranges, as well as resistance and current. In most homes, you’ll typically encounter two common voltage levels, which are 110 volts and 220 volts.
Step 1
First, locate the power outlet or component that you want to test the voltage of. If you’re testing a device, plug it into an outlet to provide power.
Step 2
Next, connect the test leads of the multimeter to their corresponding color-coded slots: the red lead goes into the “VA+” socket, and the black lead goes into the “COM,” or ground, socket.
Step 3
Now, turn on the multimeter and set the measurement dial to the AC voltage range that you want to measure. Typically, a range of 240 volts should be sufficient for most household needs. On the dial, AC voltage is symbolized by a waveform (~).
Step 4
With the rubber grips held securely, touch each multimeter lead to a separate contact point on the circuit. When testing outlets, insert a lead into the two top openings of the outlet.
Step 5
Finally, record the voltage reading. Once you’re done, turn off the multimeter and unplug the leads.
