Quck answer
Metal tile edging is a popular choice for finishing tile installations. To install metal tile edging, follow these steps:
1. Measure and cut the metal tile edging to fit the edges of the tiles.
2. Apply adhesive to the back of the edging and press it firmly onto the edge of the tile.
3. Use a rubber mallet or hammer to ensure the edging is securely attached.
4. Repeat the process for each edge of the tile installation.
5. Once the adhesive has dried, grout the tiles as usual.
6. Clean any excess grout from the metal edging to ensure a clean and polished finish.
By following these steps, you can easily install metal tile edging and achieve a professional-looking tile installation.
Metal tile edging is a rigid metal strip in the shape of an “L” that is used to create a finished edge for metal or ceramic tiles. Unlike other types of tile edging, installing metal tile edging is a simple process.
Step 1
Start by installing the tiles on the desired surface, leaving one row untiled at the edge.
Step 2
Measure the length of the installation area using a tape measure. Take a metal edging strip and mark it at the same length. Cut the strip using tin snips.
Step 3
Take a notched trowel and scoop up a small amount of mortar used for the other tiles. Apply the mortar on the surface, extending it only to where it will be covered by the final row of tiles.
Step 4
Turn the metal edging so that the side with holes faces the surface. Press the edging against the wall, allowing the mortar to come through the holes.
Step 5
Place a tile against the edging, ensuring it aligns with the adjacent installed tile.
Step 6
Clean off any excess mortar from the sides of the tile or the edging using a damp cloth.
