Quck answer
To remove the drawers from a Snap-On toolbox with ball bearing slides, follow these steps:
1. Empty the drawer: Remove all tools and items from the drawer to make it easier to handle.
2. Locate the release mechanism: Look for the release mechanism on the sides of the drawer slides. It could be a lever, button, or latch.
3. Activate the release mechanism: Use your fingers or a small tool to activate the release mechanism. This will disengage the drawer slides from the toolbox.
4. Pull the drawer out: Once the release mechanism is activated, pull the drawer out slowly and carefully. It should slide out smoothly.
5. Repeat for other drawers: Repeat the process for each drawer you want to remove.
By following these steps, you can easily remove the drawers from a Snap-On toolbox with ball bearing slides.
Many professionals and DIY mechanics prefer Snap-On toolboxes for storing their tools. Snap-On now utilizes ball bearing slides for their toolboxes, which prevent the drawers from falling out while still allowing for smooth operation. However, there are times when tools may fall behind the drawers, necessitating the removal of the drawers in order to retrieve the tool. Removing the drawers from a Snap-On toolbox with ball bearing slides is incredibly easy compared to other types of toolbox drawers.
Step 1
Begin by opening the Snap-On toolbox drawer and removing any tools that are inside. Fully extend the drawer until you can see the clip tabs on each outer slide.
Step 2
Using a flat-head screwdriver, press up on the end of the clip tab on one side and pull the drawer until the inner slide stop is past the clip.
Step 3
Repeat the previous step for the other side of the drawer, and then simply slide the drawer out of the toolbox.
