Quck answer
To remove a Price Pfister faucet, follow these steps:
1. Turn off the water supply to the faucet by closing the shut-off valves under the sink.
2. Use an adjustable wrench to disconnect the water supply lines from the faucet.
3. Loosen the mounting nuts that hold the faucet in place using a basin wrench or pliers.
4. Once the mounting nuts are loose, lift the faucet out of the sink or countertop.
5. Clean any residue or debris from the sink or countertop surface.
6. Install a new faucet or make any necessary repairs before installing a new faucet.
Remember to consult the manufacturer’s instructions or seek professional help if you encounter any difficulties or have specific questions about your Price Pfister faucet.
If you need to fix a kitchen or bathroom faucet, the process can vary depending on the model, but when you’re removing a faucet, the process is pretty much the same for all of them. However, if you have to remove a Price Pfister kitchen faucet with a pull-down spout or sprayer, you’ll have to disconnect the spout, and that process may differ.
Price Pfister has been in business since 1910, but since 2010, the “Price” is gone and it’s known simply as Pfister. The company publishes instructional videos that apply to most of its faucet models, and they’re helpful for anyone wanting to remove a faucet. For example, removal is the opposite of the Pfister Ladera faucet installation, and the same is true for most other models.
Pfister Faucet Parts Are Similar to Those of Other Models
Pfister has been making faucets for a long time and has provided a variety of different parts over the years to hold the faucet to the sink deck, but none of these are significantly different from the parts other manufacturers use. Most likely, to remove a Pfister faucet, you’ll have to unscrew a retaining nut. The process is simple enough, but it can be complicated by the fact that the nut is stuck due to corrosion.
If you still have the box containing all the Pfister faucet parts that originally came with the faucet, you might find a long socket wrench. This tool is very useful for removing the faucet, but if you don’t have one, a basin wrench will also work. In addition to this, you’ll need a wrench, one or two pairs of locking pliers and possibly a hacksaw.
The Process for Removing a Pfister Faucet
Before you start the removal process, you’ll want to clear out the sink cabinet to give yourself space to work. You’ll probably also want to disconnect and remove the P-trap, although this isn’t necessary. Get a good headlamp that will stay on your head so you’ll be able to see what you’re doing.
- To relieve pressure, turn off the hot and cold shutoff valves and open the faucet.
- Using locking pliers or a wrench, unscrew the connectors to disconnect the faucet supply hoses from the shutoff valves. Disconnecting the hoses from the faucet itself is optional.
- Depending on the connector type, uncouple the hoses that connect the spout and sprayer to the faucet diverter.
- Use a Pfister socket wrench or a basin wrench to loosen the nuts that hold the faucet to the sink deck. The nuts may be difficult to turn, so spraying lubricant on them to dissolve rust may be necessary. Allow the lubricant to work for 10 minutes after spraying.
- After removing the retaining nuts, lift the faucet off the sink deck. If the faucet has copper tubes that cannot fit through the sink hole, cutting off the connectors with a hacksaw may be the easiest option if you do not plan to reuse the faucet.
- In preparation for the new faucet, clean off all the plumber’s putty from the sink deck.
Disconnecting the Spout and Sprayer Hoses
Modern Pfister faucets often have quick-connect hoses for the pull-down spout, sprayer, and handles in widespread models. There are four different types, but most involve pushing a tab while pushing the connector together to release it. Once released, you can simply pull it apart.
Some older faucets require unscrewing the connectors with locking pliers. While unscrewing the connector counterclockwise, use pliers to hold one side of the connection steady. If you are unsure how to disconnect these hoses, refer to the installation instructions on the Pfister website.
