Quck answer
To measure drawer pulls, follow these steps:
1. Determine the center-to-center measurement: Measure the distance between the center of one screw hole to the center of the other screw hole on the back of the drawer pull. This measurement is important when replacing pulls or choosing new ones.
2. Measure the overall length: Measure the length of the drawer pull from one end to the other. This will give you an idea of the size and proportion of the pull.
3. Consider the projection: Measure the distance from the back of the pull to the furthest point it extends. This will help determine how much space the pull will take up when installed.
By taking these measurements, you can ensure that the new pulls will fit properly on your drawers and enhance the overall aesthetic of your furniture.
The installation of cabinet drawer pulls involves attaching them to the cabinets using screws. These pulls have posts with threads on the back side, and the screws go through holes in the cabinet face and into the posts. Most pulls have two holes, and the standard spacing between them is 2 1/2 inches. There are various styles and sizes of drawer pulls available, so it is necessary to measure them before buying replacements. Replacing cabinet hardware is a cost-effective way to upgrade cabinets.
Step 1
Start by opening the cabinet drawer. Locate the screws on the back side of the drawer face. These screws are used for mounting the drawer pulls.
Step 2
Using a screwdriver, turn it counterclockwise to unscrew the screws. Hold onto the drawer pull while removing the screws from the drawer.
Step 3
Take the drawer pull and place it on a work surface with the threaded posts facing upwards. Use a tape measure to measure from the center of one screw hole in a threaded post to the center of the other screw hole. This measurement is necessary when selecting replacement pulls.
