Quck answer
Removing a wall heater requires careful planning and execution. Here are the steps to safely remove a wall heater:
1. Turn off the power: Locate the circuit breaker or fuse that controls the heater and switch it off to cut off the power supply.
2. Disconnect the gas or electricity supply: If it’s a gas heater, turn off the gas supply valve. For electric heaters, disconnect the wires from the power source.
3. Remove the cover: Take off the cover or grille from the heater to access the internal components.
4. Disconnect the heater: Carefully disconnect any gas or electrical connections between the heater and the wall.
5. Remove the heater from the wall: Unscrew any mounting screws or brackets securing the heater to the wall. Lift the heater off the wall and set it aside.
6. Patch the wall: Fill any holes or gaps left behind by the heater using spackling compound or drywall patching material.
7. Restore power: Once the heater is removed and the wall is patched, restore the power supply by turning on the circuit breaker or fuse.
Always follow safety precautions and consult a professional if you are unsure about any step of the process.
Wall heaters are usually gas or electric-powered heaters that are meant to be attached directly to a wall. The number of clips and fasteners used to secure a wall heater to a wall may vary depending on the unit. To remove a wall heater, you need to take off these clips and disconnect it from the gas line that supplies power to the heater. It is crucial to follow specific steps to avoid any serious injuries.
Step 1
If you are using an electric wall heater, turn off all electricity running to it. If the unit has an “On/Off” switch, switch it off. For extra safety, turn off the circuit breaker in your home’s circuit box that is connected to the wall heater. Wait a few minutes for the heater to discharge any remaining electricity once it is turned off.
Step 2
If you are using a gas wall heater, turn off the gas line connected to it. There will be an “On/Off” valve for the gas line on the wall heater (the exact location may vary depending on the model). Turn this valve to the “Off” position. Also, turn off the source of the gas (for example, use the shutoff valve on a nearby propane tank) and disconnect the gas line from the back of the unit. You may need to use a wrench to disconnect the gas line, depending on the model.
Step 3
Use either a screwdriver or a drill to remove the screws that are holding the wall heater onto the wall. The number of screws needed to be removed depends on the size and model of the unit. Start from one side of the wall heater and check the sides of the unit to find and remove any screws. Once the screws are removed, the wall heater will separate from the wall, and you can decide what to do with it.
