Quck answer
1. Check the power supply: Make sure the heater is properly plugged in and that the outlet is functioning.
2. Inspect the thermostat: Verify that the thermostat is set to the desired temperature and is functioning correctly.
3. Examine the circuit breaker: If the heater is not turning on, check the circuit breaker to see if it has tripped. Reset it if necessary.
4. Clean the heating element: Remove any dirt or debris from the heating element to ensure proper heat distribution.
5. Test the fan motor: If the heater has a fan, check if it is working properly. If not, it may need to be replaced.
6. Contact a professional: If you have followed these troubleshooting steps and the heater still does not work, it may be a more serious issue. Consult a professional for further assistance.
There are several reasons why your electric space heater might not be working, but most of them can be easily fixed. Many space heaters have a built-in safety feature that automatically shuts off the heater if it tips over or gets too hot. Additionally, there could be an issue with the electrical outlet or the power supply in your home. Follow these simple troubleshooting tips to get your electric heater working again.
Step 1
First, turn off the electric heater and unplug it. Check the fuse box in your house to see if any fuses have blown or if any circuit breakers have been tripped. If necessary, replace the fuse or reset the circuit breakers. Once that is done, plug the electric heater back in and turn it on.
Step 2
If your electric heater still doesn’t turn on, try resetting the auto safety shut off feature. To do this, switch the power switch to the off position. Unplug the heater and allow it to cool down for approximately 10 minutes. After that, plug it back in and turn the power switch back on.
Step 3
If the heater still doesn’t come on after resetting the auto safety shut off feature, turn it off and unplug it again. Check for any objects or debris that may be blocking the heater or preventing it from oscillating. Remove any obstacles, plug the heater back in, and turn it on.
Step 4
Try adjusting the thermostat switch to a higher level and keep an eye on the heater to make sure it doesn’t turn off due to overheating.
Step 5
Finally, make sure to place the electric heater in a location where it won’t be obstructed, accidentally tipped over, exposed to water.
