Quck answer
To reset a GE built-in oven, follow these simple steps:
1. Ensure that the oven is turned off and disconnected from the power source.
2. Locate the circuit breaker or fuse box and turn off the power supply to the oven.
3. Wait for at least 5 minutes to allow the oven to fully reset.
4. Turn the power back on by flipping the circuit breaker or replacing the fuse.
5. Once the power is restored, the oven should be reset and ready to use.
Remember to always exercise caution when working with electrical appliances and consult the oven’s user manual for specific instructions.
Similar to a computer, the electronic control panel of a GE built-in oven can become corrupted and cause various malfunctions and slowdowns. This could be the reason why your GE electric range oven and clock are not working or why you keep receiving an error code that completely shuts down the oven. Error codes are usually accurate, so if one appears, it is important to consult the owner’s manual and investigate its meaning. Before looking up the error code, consider restarting the entire control panel. It is a simple process.
Resetting the GE Profile Oven Control Panel
The Profile line is just one of the several appliance lines offered by GE, but when it comes to resetting the control panel, the procedure is the same as for any other GE oven. The entire process is explained on the GE Appliances website. Just like restarting the processor in your laptop by turning it off and on to reboot the operating system, you can restart a GE oven control panel by turning it off and then back on.
The easiest way to do this is by unplugging the appliance. However, since the plug is built-in, you may not have access to it. In that case, the next best option is to switch off the breaker in the main panel that controls the oven receptacle. GE recommends keeping it off for at least one minute before switching it back on. To confirm that the power to the stove is actually off, make sure the electronic clock on the stove turns off.
The oven breaker is a double one, meaning it has two switches connected by a bonding plate. It doesn’t matter which breaker you turn off because the other one will automatically turn off as well. The same applies when turning the breaker back on.
Restarting After an F9 Error Code
If your house experiences a sudden power surge from a source such as a nearby lightning strike, the control panel may display an F9 or F9 E0 error code. This can also occur when power is restored after an outage or if you press any keys on the panel during the 10-second power-up sequence after power is restored.
You can usually make this error message disappear by performing a control panel restart, which involves turning off the breaker, leaving it off for one minute, and then turning it back on. Make sure to avoid pressing any buttons until after the 10-second power-up sequence has completed.
GE Oven Does Not Power On
If you are experiencing issues with your GE oven, you may be able to restore its functionality without resorting to a control panel restart. Some things to check for include:
Possible Reasons for Oven Control Panel Not Responding
- The control panel may be locked, which is a safety feature for children. To unlock it, press and hold the Control Lock button for three seconds.
- The Delay Start feature might be engaged, preventing you from using the oven until it is overridden. Consult your owner’s manual for instructions on how to override this feature for your specific model.
- If there is no power at all, including the clock, the breaker controlling the oven circuit may have tripped. Try resetting the breaker, but if it keeps tripping, it is advisable to contact an appliance professional for further investigation.
