Quck answer
Converting a Kenmore gas stove to LP (liquefied petroleum) gas is a relatively simple process. Here are the steps to follow:
1. Gather the necessary tools and materials, including a conversion kit specifically designed for your Kenmore gas stove model.
2. Turn off the gas supply to the stove and disconnect it from the power source.
3. Remove the burner grates, burner caps, and burner bases from the stove.
4. Install the new orifice spuds provided in the conversion kit onto the burner valves.
5. Replace the burner bases, caps, and grates.
6. Adjust the air shutter on each burner to ensure proper combustion.
7. Reconnect the stove to the gas supply and power source.
8. Test the stove by lighting each burner and checking for any gas leaks.
By following these steps and referring to the specific instructions provided with your conversion kit, you can successfully convert your Kenmore gas stove to LP gas.
By default, when you purchase a Kenmore gas stove, it is set to use natural gas. If you want to switch to using liquid propane, some appliance stores can assist you with the conversion. Alternatively, you can convert the gas stove yourself, although it is recommended to hire a service professional for this task.
How to Convert a Kenmore Gas Stove to LP
Image Credit:
artisteer/iStock/GettyImages
Before Converting Your Stove
When converting a natural gas oven to liquid propane, it is important to proceed with caution. While the process is not difficult and requires minimal tools, you need to be aware of what you are working with. For newer models, you simply need to flip over the cap installed on top of the regulator tower. However, older models may not have an appliance regulator, in which case you need to know the year, make, or model of the appliance and purchase a conversion kit accordingly.
Step One: Turn Off the Gas
Prior to starting the project, ensure that the gas supply to the Kenmore Gas Stove is turned off. If there is a connection, disconnect the gas pipe using an adjustable wrench. After disconnecting the pipe, remove the grates from each stove burner and set them aside.
Step Two: Remove the Orifices
Next, prop open the top of the stove and remove the orifice from each burner assembly using a nut driver. A nut driver is a tool similar to a screwdriver, but specifically used for tightening or loosening nuts and bolts. Replace the natural gas orifice with the LP gas orifice on each burner. Then, locate the gas regulator underneath the stove and remove the hex nut using an adjustable wrench. Before proceeding, flip the plastic piece over on the gas regulator.
Step Three: Install the Hex Nut
Using an adjustable wrench, install the hex nut on the regulator and tighten it. To allow the oven to burn LP gas, tighten the orifice on the stove. Finally, reconnect the gas line to the stove and tighten it with an adjustable wrench. Turn the gas supply back on and make a note that the oven has been converted.
