Quck answer
To remove the safety switch from a Cub Cadet seat, follow these steps:
1. Locate the safety switch underneath the seat of your Cub Cadet mower.
2. Disconnect the wire harness connected to the safety switch by unplugging it.
3. Use a wrench or screwdriver to remove the bolts or screws securing the safety switch to the seat.
4. Once the bolts or screws are removed, carefully lift the safety switch off the seat.
5. Dispose of the safety switch properly or replace it with a new one if necessary.
Remember to exercise caution when working with electrical components and always follow the manufacturer’s instructions.
The Cub Cadet is one of the most popular riding mowers available today. Along with its reputation for being durable, the Cub Cadet also comes with various safety features. One of these safety features is the seat safety switch. This switch automatically stops the engine when weight is no longer on the seat, such as when you get off to change the bagger. Removing the seat safety switch can be done in approximately 10 minutes.
Step 1
To begin, use a wrench to disconnect the negative battery cable from your Cub Cadet. Then, remove the spark plug wire.
Step 2
Lift the seat up. You will find the safety switch attached to the underside of the seat.
Step 3
Next, unscrew the screws that are attached to the underside of the seat. This will release the assembly.
Step 4
Using a screwdriver, remove the small screw located on the switch itself.
Step 5
Separate the two halves of the switch and disconnect the wires. These two wires are connected to the ignition.
