Quck answer
To remove a stuck water hose fitting, follow these steps:
1. Turn off the water supply and relieve any pressure in the hose.
2. Apply lubricant, such as WD-40, to the fitting and let it sit for a few minutes.
3. Use adjustable pliers or a wrench to grip the fitting securely.
4. Gently twist the fitting counterclockwise to loosen it.
5. If the fitting is still stuck, apply heat from a hairdryer or heat gun to expand the metal and loosen the fitting.
6. Repeat steps 3-5 until the fitting is fully removed.
7. Clean the threads and inspect for any damage before attaching a new fitting.
Water hoses often have a female fitting on one end that can get stuck. The most common place for the fitting to become stuck is on a faucet. Many hoses stay attached to a faucet throughout the summer and can be difficult to remove in the fall. However, it is possible to remove a stuck water hose fitting with just a few tools and less than 30 minutes of your time.
Step 1
Start by turning off the water supply to the faucet using the faucet handle. If there is a sprayer attached to the hose, squeeze it to discharge any remaining water. If there is no sprayer, you can skip this step.
Step 2
Apply a penetrating catalyst to the fitting. Make sure the catalyst covers the connection between the fitting and the faucet. Allow the catalyst to sit for 20 minutes to help loosen the fitting.
Step 3
Using a pair of slip-joint pliers, grip the hose fitting securely. Turn the fitting counterclockwise to loosen it. Continue turning the fitting until it can be removed by hand.
Step 4
If the fitting still refuses to detach from the faucet, repeat the process. Eventually, the fitting will come loose and can be unscrewed.
