Quck answer
To use Eliminator Weed and Grass Killer Concentrate effectively, follow these instructions:
1. Measure: Mix 1.5 ounces of concentrate with 1 gallon of water in a sprayer or watering can.
2. Prepare: Fill the sprayer or watering can with the diluted mixture.
3. Apply: Spray the solution directly onto the weeds or grass you want to eliminate, ensuring full coverage.
4. Wait: Allow the product to work for at least 24 hours before watering or rainfall.
5. Repeat: For stubborn weeds, a second application may be necessary after two weeks.
6. Clean up: Thoroughly clean the sprayer or watering can after use to avoid cross-contamination.
Remember to wear protective clothing and avoid spraying on desirable plants. Read and follow all label instructions for best results.
The active components of Eliminator Weed & Grass Killer Super Concentrate consist of glyphosate and isopropylamine salt. The manufacturer claims that the formula has the ability to eliminate all types of annual and perennial broadleaf and grassy weeds. This herbicide can be used in flowerbeds, around shrubs and trees, on driveways and walkways, and along fences. The manufacturer also states that the herbicide remains in the treated area and does not move through the soil, meaning that it only kills the plants it is sprayed on. Any residue that comes into contact with the ground breaks down into natural substances. Since this is a concentrated formula, it needs to be diluted before use.
Step 1
In a tank sprayer, mix 3 tbsp. of Eliminator weed killer with 1 gallon of water to control annual weeds. Increase the dosage to 5 tbsp. of herbicide per gallon of water when treating perennials and brush. Spray the plants that you want to eliminate from your garden.
Step 2
Add 3 tbsp. of herbicide to a hose-end sprayer container. Set the dial on the sprayer to 1.5 ounces. Turn on the water and spray the plants that you want to kill. This amount of prepared concentrate is sufficient to cover 300 square feet of weeds. Use 5 tbsp. of herbicide per gallon of water to eliminate perennial and woody plants.
Step 3
In a hand-trigger sprayer, dilute 2 tsp. of Eliminator Weed & Grass Killer in 3 cups of water. Spray the unwanted plants in your garden. Mix 1 tbsp. of weed killer with 3 cups of water in a hand-trigger sprayer to treat perennials and shrubby plants.
Step 4
You can apply the herbicide at any time during the weed’s growing season. Young plants will die within two weeks. Established perennials may take up to one month to completely disappear. If they do not die within four weeks, treat the plants again.
