Quck answer
To remove wheels from bed frames, follow these steps:
1. Gather the necessary tools: a wrench, pliers, and a screwdriver.
2. Flip the bed frame upside down to access the wheels.
3. Use the pliers to hold the wheel in place while using the wrench or screwdriver to loosen and remove the screws or bolts attaching the wheel to the frame.
4. Repeat this process for each wheel.
5. Once all the wheels are removed, flip the bed frame back over and ensure that it sits evenly on the floor.
6. If needed, use the wrench to tighten any remaining screws or bolts on the bed frame.
Remember to exercise caution while removing the wheels to prevent any injuries or damage to the bed frame.
Bed frames made of metal with wheels are typically included with the purchase of a new mattress. They are compact and do not have a headboard or footboard. These frames are convenient for rearranging furniture in a bedroom, but they can scrape floors such as linoleum and hardwood, and they are not the most stable beds. If too much pressure is applied to one side of the bed or if a wheel is bumped during movement, the bed may break or become uneven. Fortunately, these wheels can be easily replaced with new ones or removed completely and replaced with bed risers and stationary legs.
How to Take Off Wheels from Bed Frames
Image Credit:
huettenhoelscher/iStock/GettyImages
Setting Up the Bed
To remove the wheels, prop up the side of the bed with the broken wheel using another piece of furniture like a sturdy chair, or ask someone to hold it up.
If your goal is to remove all four wheels, move the chair supporting the frame to each corner as you remove each wheel, or remove all bedding, the mattress, and box springs, and then turn the bed frame on its side. Have someone hold it up or lean it against a wall for stability.
If the frame is not very heavy, it can simply be turned over and laid on the ground with the legs and wheels facing upward.
Removing Wheels
Most bed frames have casters with a post as their wheels. This means that they have industry-standard wheels that fit into the grooves of the metal bed frame. These wheels can be removed by simply pulling them out.
If a wheel does not come out after being pulled, wiggle the wheel inside the stem to loosen it. If that does not work, try lightly tapping the top of the wheel slot with a blunt object to loosen it from the socket.
Replacing Wheels
There are various types of bed legs available online with caster sockets that will fit the metal bed frame, or plastic socket adapters for the bed frame. The industry standard sizes for caster sockets are 3/8 and 7/16, so make sure that any legs you purchase for a bed frame fit those measurements. If the bed legs are 3/8 or 7/16, they should slide easily into the bed frame, just like the wheels were able to be pulled out.
