Quck answer
1. Prepare the necessary tools: screwdriver, pliers, and a wrench.
2. Remove the cushions and set them aside.
3. Locate the screws or bolts that hold the pull-out mechanism in place.
4. Use the screwdriver or wrench to remove these screws or bolts.
5. Carefully lift and remove the pull-out mechanism from the sofa frame.
6. If there are any additional screws or bolts holding the mechanism together, remove them as well.
7. Separate the different components of the pull-out mechanism, such as the frame and the mattress.
8. Take note of the order in which the components are assembled for easier reassembly later.
9. Clean and inspect each component before reassembling or replacing any damaged parts.
10. Follow the reverse steps to reassemble the sofa pull-out, making sure to tighten all screws and bolts securely.
If you have a sofa with a pull-out bed and you need to relocate or fix it, you will likely have to disassemble the pull-out mechanism. This is the heaviest part of the furniture and it is typically held in place by several retaining bolts and screws that connect to various hinge arms, allowing it to fold up and out. Although not a complicated task, it is recommended that you take the time to make notes on the location of each bolt and screw for proper reassembly.
Step 1
Remove the cushions from the sofa and set them aside. Also, take off any other items such as throw blankets.
Step 2
Grab the handle or pull-out strap attached to the pull-out bed and pull it up and out. Then, unfold it completely so that it lays flat, revealing the mattress.
Step 3
Take out the mattress from the pull-out and place it to the side. Locate the retaining bolts or screws that secure the hinge arms to the inside of the sofa frame. There may be four to six bolts, with two to three on each side.
Step 4
Fold the pull-out halfway back so that the retaining bolts or screws are still visible but the bed is not fully extended.
Step 5
Loosen the retaining bolts or screws using a wrench and socket or screw gun, depending on what is applicable. Slowly remove the retaining bolts or screws with one hand while supporting the pull-out frame with the other hand. You may need to use pliers to successfully loosen the bolts or screws.
Step 6
Pull the pull-out frame out from the cavity frame of the sofa and fold it up completely to make it more compact and easier to carry. If necessary, wrap duct tape around all four corners to prevent the pull-out from opening as you move it.
