Quck answer
Taking apart a La-Z-Boy couch is a simple process that requires basic tools and a systematic approach. Start by removing any cushions or pillows from the couch. Then, locate the screws or bolts that hold the frame together and use a screwdriver or wrench to loosen and remove them. Once the frame is disassembled, carefully separate the different sections and set them aside. If there are any additional components, such as reclining mechanisms or footrests, detach them according to the manufacturer’s instructions. Remember to keep track of all the screws and bolts for easy reassembly.
It’s time to move, and you need to get your La-Z-Boy couch through a narrow doorway. Although La-Z-Boy manufactures various models of couches, they are all constructed differently. The reclining motion sofas from La-Z-Boy are designed to be taken apart, while their stationary sofas are not. However, all La-Z-Boy sofas have feet that are either bolted or screwed on, allowing for a few extra inches of clearance when moving the couch. Disassembling your sofa, to the extent permitted by the specific model, is a straightforward process.
Step 1
When purchasing your La-Z-Boy couch, ask for the instruction booklet specific to your model.
Step 2
Before disassembling your couch, measure the doorway or space that you need to clear, as well as the dimensions of the couch itself. If there is only a small amount of clearance, try carefully angling the sofa to fit through without taking it apart.
Step 3
Begin by removing all loose cushions. If your La-Z-Boy couch has motion seats, you will find two levers on the back of each section, typically in the bottom corner. These hinge levers may be covered by a fabric flap.
Step 4
To remove a section, pull up on the levers and lift it off the brackets. Each seat has its own set of brackets. The seat backs can be lifted straight up to remove them, but you may need to push in on each side where the hinges are attached. To reassemble the couch, follow the same steps in reverse.
Step 5
If you have a stationary La-Z-Boy sofa that cannot be taken apart, you can still remove the feet. The feet are attached with bolts or screws and can be taken off using either a Phillips screwdriver or a Torx screwdriver.
