Quck answer
Cleaning a hot tub is essential to maintain its hygiene and functionality. Here are the steps to clean a hot tub:
1. Drain the water: Start by draining the water from the hot tub. Follow the manufacturer’s instructions for this process.
2. Clean the shell: Use a non-abrasive cleaner and a soft cloth to clean the inside of the hot tub shell. Remove any dirt, debris, or stains.
3. Clean the filters: Remove the filters and rinse them with water. Soak them in a filter cleaning solution, rinse again, and let them dry before reinstalling.
4. Clean the jets: Use a jet cleaner to remove any buildup or clogs in the jets. Follow the product instructions for the best results.
5. Refill the hot tub: Once everything is clean and dry, refill the hot tub with fresh water. Balance the chemicals according to the manufacturer’s recommendations.
Regular cleaning and maintenance will ensure that your hot tub remains a safe and enjoyable place to relax and unwind.
Similar to any other item in our households, if you own a hot tub, it is necessary to clean it properly in order to ensure its effective functioning and to keep it free from bacteria. Hot tubs should be drained and cleaned at least once every three months to maintain their optimal performance.
Before you begin, there are two very important things you should know: (1) Always unplug your hot tub before draining and cleaning it; and (2) Avoid using any type of soap or sudsing product to clean your hot tub, as this can damage the jets and turn your hot tub into a machine that produces bubbles.
Methods to Prolong the Cleanliness of Your Hot Tub
- Before entering the hot tub, rinse off any lotions, oils, cosmetics, or hair products.
- Avoid entering the hot tub when you are sweating.
- Ensure that your hot tub remains free of urine and feces (although this may seem obvious, it is worth mentioning).
- Do not allow pets to enter your hot tub.
Step 1: Drain your hot tub.
Follow the instructions provided by the manufacturer of your hot tub to drain it. Typically, this involves removing a side panel and using a water hose to drain the tub.
Step 2: Apply a vinegar cleaning solution to the interior of the hot tub.
In a spray bottle, mix equal parts of distilled white vinegar and water, and shake the bottle well before each use. Ensure that you spray the vinegar solution into the hot tub jets, as well as around all corners and crevices. Allow the solution to sit for 10 to 15 minutes.
Step 3: Remove any grime from your hot tub by scrubbing it.
If there is any buildup of oils, soap, or cosmetics inside your hot tub, it can create a ring. Use the vinegar cleaning solution and a scrub brush to eliminate any buildup.
Step 4: Thoroughly rinse the interior of the hot tub with a hose.
Make sure to use your hose to spray the jets, as this will aid in removing all of the vinegar cleaning solution.
Step 5: Allow the cleaning solution to completely drain out of the tub.
It is crucial to rinse the interior of the hot tub thoroughly and ensure that all of the cleaning solution has drained out in order to prevent the formation of suds.
Step 6: Insert the drain tube plug.
Make sure to replace the plug for the drain tube.
Step 7: Refill the hot tub and treat it with the recommended chemicals.
Follow the instructions provided by the manufacturer regarding chemical treatments.
Step 8: Reconnect the hot tub to an electrical socket and turn it on.
Ensure that your hot tub is filled with water before turning it back on.
